 |
- The handy TRIME®-FM displays direct %vol moisture content and TDR level at the touch of a button
- Compact and lightweight device for field use
- A wide range of 2- and 3-rod probes
|
| TRIME®-FM |
- The TRIME-FM is the standard field measuring device for volumetric moisture in porous materials. The broad range of applications in even the most saline materials is without equal.
- The intelligent automatic TDR-curve reading electronics are arranged in the robust and waterproof (IP 67) aluminium housing, withstanding even the highest demands of all-day field use.
- Its speed and easy push-button operation is unsurpassed. In less than 10 seconds, the water content is shown in % by volume, TDR-level (as a measure of salinity). The data is displayed clearly on a clear 4-line LCD panel.
- Engineered to allow maximum flexibility and extension potential, a wide variety of probe types can be connected to the FM-device. A built-in EEPROM in the probe connector case stores all probe parameters such as type and cable length.
- The TRIME-FM2 version is designed for the 2-rod probes and the FM3 version for all other TRIME probe types. Every probe must be adapted to the FM prior to use. 2-rod probes are not compatible with FM3 versions and vice versa.
- The TRIME-FM has a RS232/V24 for an external power supply (7..15V/DC, 250mA) and connection to a PC. The 0..1V analogue output allows optional connection to external devices such as dataloggers.
|
|
| TRIME©-FM |
| Manual operation with 4-line-LCD panel for showing water content, TDR-level (conductivity) and device mode. |
| Power supply: |
7V..15V-DC, 600mA/h battery capacity. Full battery is sufficient for up to 300 measurement cycles. |
| Supply current: |
8mA standby, 250mA during 10..15sec. measuring time |
| Resolution: |
0.1% |
| Repeating accuracy: |
0.3% |
| Temperature range: |
-15°C...50°C, wider temperature ranges on request! |
| Temperature caused value drift: |
max. +-0.5% |
| Standard interface: |
0..1V analogue output and RS232/V24 |
| Calibration data: |
calibrated for mineral soils, but individually adaptable per software |
| Case: |
weatherproof, robust aluminium diecast (IP67) |
| Dimensions: |
210 x 90 x 60mm, 875g |
| For information on the measuring accuracy and range as well as the tolerable range of bulk electrical conductivity please refer to the corresponding probe. |
| Manuals |
|
English
|
|
|
|
|
Deutsch
|
|
|
|
| Software |
|
English
|
|
|
|
|
|
|
| Brochure |
|
English
|
|
|
|
So far no questions are to be answered.
|
P2 rod probes 
P3 rod probes
T3 tube probes 
